Partner Guidelines

HydroCAD^® Stormwater Modeling - Since 1986

HydroCAD Supported Products

HydroCAD is pleased to provide integrated support for specific stormwater products that cannot be readily modeled using the program's generic modeling capabilities. This typically includes prefabricated storage products including concrete and injection-molded chambers, as well as specialized outlet controls, such as vortex flow control valves.

If you have a product that you feel would benefit from special handling in HydroCAD, please send details to and we will be glad to discuss the available options. In addition to providing technical modeling capabilities tailored to your product, we can explore opportunities for promoting and supporting your product to the HydroCAD community.

Guidelines for Approved Partners

Approved partners will receive a dedicated page on our web site containing basic information about their product and how it can be modeled in HydroCAD. See the Partner page for examples.

In return, partners are expected to display the following minimum HydroCAD information on their web site:

1) A basic paragraph stating that the partner's product can be modeled in HydroCAD, and

2) The "Supported Product" logo must be displayed.

3) The text and logo must be appropriately hyperlinked, as described below.

These items must be displayed on at least one publicly accessible page of the partner's web site, and must be directly accessible from the partner's primary page for that product.

Details on these items appear below.

1) Descriptive text

The partner page should provide, at a minimum, a descriptive paragraph similar to one of the following examples, including a trademark acknowledgement somewhere on the same page(s):

XYZ chambers can be easily modeled with the HydroCAD Stormwater Modeling System, allowing simplified calculation of the chamber's storage and infiltration behavior. The HydroCAD Chamber Wizard also performs automated chamber system layout, and simplifies the process of designing a chamber system meeting specific storage and footprint requirements. Click here for details.	XYZ flow control devices can be easily modeled with the HydroCAD Stormwater Modeling system, allowing simplified analysis of the devices' behavior in a drainage and stormwater management system. HydroCAD includes custom rating curves for these devices, which can be used with the "special outlet" capability to easily define the devices' stage-discharge characteristics. Click here for details.
HydroCAD^® is a registered trademark of HydroCAD Software Solutions LLC.

2) How to display the logo

The partner is authorized to display the "Supported Product" logo on the page(s) of their choice. The logo must be displayed using one of the following snippets of HTML code:

<img border="0" src="https://www.hydrocad.net/partners/hisp1-logo.gif" align="right" alt="Click for details" width="305" height="125">

<img border="0" src="https://www.hydrocad.net/partners/hisp2-logo.gif" align="right" alt="Click for details" width="200" height="81">

3) Hyperlink details

The text and logo must be hyperlinked to the specific URL provided to each partner. This will ensure that your customers go directly to the information about your product when they visit our site.

Other Provisions

The text and logo may be displayed only by partners whose products are explicitly supported by HydroCAD. These items may be placed on the web page(s) of your choice, as long as they are appropriate to your product, and are not derogatory, profane, or otherwise inappropriate. You are authorized to use the "HydroCAD" trademark only as described above. No other rights of ownership or usage are granted. We (HydroCAD Software Solutions) reserve the right to revoke the use of the logo for any reason at any time, or to make changes to the logo itself as we see fit.

For printed materials or advertising, please use the high-resolution logo with a size of 2000x819 pixels.